labgrid.driver.power package


labgrid.driver.power.apc module

labgrid.driver.power.apc.power_set(host, port, index, value)[source]
labgrid.driver.power.apc.power_get(host, port, index)[source]

labgrid.driver.power.digipower module

labgrid.driver.power.digipower.power_set(host, port, index, value)[source]
labgrid.driver.power.digipower.power_get(host, port, index)[source]

labgrid.driver.power.gude module

labgrid.driver.power.gude.power_set(host, port, index, value)[source]
labgrid.driver.power.gude.power_get(host, port, index)[source]

labgrid.driver.power.gude24 module

This driver implements a power port for Gude Power Switches with up to 24 ports. These switches differ in their API to the previous 8-port switches for set- and get-commands.

Driver has been tested with: * Gude Expert Power Control 8080

labgrid.driver.power.gude24.power_set(host, port, index, value)[source]

The gude web-interface uses different pages for the three groups of switches. The web-interface always uses the ‘correct’ page to set a value. But commands for all pages are accepted on all pages.

labgrid.driver.power.gude24.power_get(host, port, index)[source]

Get the status of a port.

labgrid.driver.power.gude24.get_state(request, index)[source]

The status of the ports is made available via a html <meta>-tag using the following format: <meta http-equiv=”powerstate” content=”Power Port 1,0”> Again the status of all ports is made available on all pages.

labgrid.driver.power.gude8031 module

labgrid.driver.power.gude8031.power_set(host, port, index, value)[source]
labgrid.driver.power.gude8031.power_get(host, port, index)[source]

labgrid.driver.power.gude8316 module

labgrid.driver.power.gude8316.power_set(host, port, index, value)[source]
labgrid.driver.power.gude8316.power_get(host, port, index)[source]

labgrid.driver.power.netio module

labgrid.driver.power.netio.power_set(host, port, index, value)[source]
labgrid.driver.power.netio.power_get(host, port, index)[source]

labgrid.driver.power.netio_kshell module

tested with NETIO 4C, should be compatible with all NETIO 4-models

labgrid.driver.power.netio_kshell.power_set(host, port, index, value)[source]
labgrid.driver.power.netio_kshell.power_get(host, port, index)[source]

labgrid.driver.power.sentry module

This driver was tested on those models: CW-24VDD and 4805-XLS-16 but should be working on all devices implementing Sentry3-MIB

labgrid.driver.power.sentry.power_set(host, port, index, value)[source]
labgrid.driver.power.sentry.power_get(host, port, index)[source]

labgrid.driver.power.simplerest module

Simple rest interface for Power Port. Used for ex. misc Raspberry Pi configs

Author: Kjeld Flarup <>

The URL given in hosts in exporter.yaml must replace {value} with ‘0’ or ‘1’ It is optional whether to use {index} or not.


model: simplerest host: ‘{index}/{value}’ index: 0

labgrid.driver.power.simplerest.power_set(host, port, index, value)[source]
labgrid.driver.power.simplerest.power_get(host, port, index)[source]